PTFE COATED CONVEYOR BELTS

PTFE COATED CONVEYOR BELTS

PTFE COATED FIBREGLASS CLOTH

PTFE is a material of remarkable properties: Nonstick, friction free self lubricating, non-wettable, nonflammable, non brittle, non-toxic, resistant to atmospheric conditions, resistant to fungus growth are some of its major properties.

Its electrical properties are equally outstanding. All properties are maintained over a wide temperature range -200oC to +360oC.

FIBRE GLASS too is a material of remarkable properties. Fabrics made from continuous filament yarn exhibit superior properties in terms of high tensile strength, low elongation, high temperature resistance etc.

A combination of both produces a unique blend PTFE / GLASS CLOTH, retaining all the properties of both the constituents. It is highly suitable for manufacturing conveyor belts for high temperature resistance etc.

THICKNESS AVAILABLE AND ITS TECHNICAL SPECIFICATIONS


Thickness Weight Breaking strength Edge tear strength Di-Electric Strength
Mil mm Gms/ mtr2 (Kg/Cm) (Kgs) (Volts)
6 0.15 305 19 5.4 6500
10 0.25 500 35 16.0 7000
14 0.35 460 70 30.0 7500
22 0.55 1050 80 40.0 -

MAIN PROPERTIES


PHYSICAL / MECHANICAL PROPERTIES

ELECTRICAL PROPERTIES

  • Outstanding non-stick properties.
  • High tensile & tear strength.
  • Very low elongation at break, the most importantproperty required for any conveyor belt.
  • Light - weight - requires very low power to drive
  • Unsurpassed dielectric properties, make the belts the only   suitable   choice for use in micro-wave Ovens.
  • Unique electrical insulation properties.

CHEMICAL PROPERTIES

THERMAL PROPERTIES

  • Non-toxic - Safe for hygiene
  • Inert to almost all chemicals, paints & solvents
  • Non-wettable, lower moisture absorption than 0.01% at 100oc
  • Immune to fumes & fungus
  • Conserves heat energy during passage through   oven or   dryer.   Does not loose energy through   radiation.
  • Retains all properties throughout wide operating   temperature   range.
  • Operating temperature tem. -2000c to +3600c.

TYPES OF JOINTS
APPLICATIONS