PTFE THREAD SEAL TAPES


TECHNICAL PARAMETERS

Thickness: 0.075mm (3 Mil) Temperature: -240oC TO +260oC
Elongation: 165% to 190% Pressure: 170 Bar
pH Range: 0 To 14    

The Tapes Are Manufactured As Per British Standards (BS-4375) & Military Specifications (MIL-T-27730A)

 


APPLICATIONS

Chemical Plants Gas Cylinders Hydraulic & Pneumatic Equipments Paper Industries
Domestic plumbing Pharmaceutical Industries Medical Equipments Auto Industries
Refineries Food Processing Units Cryogenic Equipments  

HOW TO USE PTFE THREAD SEAL TAPES


LENO SPLICE (POROUS)

Simply wind the tapes to wrap around male thread of the joint with a right handed rotation. And on each following turn, allow an overlapping of about 10mm


LENO SPLICE (POROUS)

Then give a light pressure with fingers, and the tape will easily stick to the rotation. And on each following turn, allow an overlapping of about 10mm


LENO SPLICE (POROUS)

Thus forming up a perfect sealing of the screwed joint.

LENO SPLICE (POROUS)

Then give a light pressure with fingers, and the tape will easily stick to the rotation. And on each following turn, allow an overlapping of about 10mm


 

THE ALL IMPORTANT DRAPE FACTOR

PTFE THREAD SEAL TAPESThe tape on the threads before winding.

The same width of the tape after winding has been stretched @ 200% but has not been broken or cut on the sharp crest of the threads.

PTFE THREAD SEAL TAPES

 

 

How PTFE Tape flows into the gap between the threads to seal the joint.

 


All technical information & recommendations given are based on our first hand experiences. However we do not undertake any legal responsibilities for the same. The customer is advised to check information data & results. Since the performance of a tapes can be judged only through onsite evaluation.